• Catologue Home
• Diving Tanks
• Regulators, Gauges, Hoses
• Square Manifold Valves

• Extrair -Nautic Bag
• Oxygen/Mixtures Tanks
• Jacket
• 232 Atm Nitrox Valves

• Emergency Oxygen
• Air Tanks
• 232 Atm Valves
• 3/4npsm 232 Atm Valves

• Rebreathers
• Tank Accessories
• 300 Atm Valves
• Specialty Valves

Regulators, Gauges and Hoses

Our regulators are specialized for subacqua environments that require very high performance, reliability and safety. Our decades of manufacturing expertise enable us to deliver products that are reliable, simple and last longer. The pressure balancing system of the first stage guarantees consistency while the pressure of the tank changes while the pre-regulator system guarantees a better air flow without compromising quality, reliability and safety.

With a first stage made with chromed brass, it has a compensating piston based on depth pressure to reduce the pressure from 200 to 9 atmospheres and includes 2 3/8 low pressure outputs and one 7/16 high pressure outputs. Capable of 1200 L/m with a yoke connection cod. 12263 and with a DIN connection code 12264.

Second stage master with a low pressure 750mm hose. The demand valve's body is constructed of shockproof polycarbonate and internally is made of brass and stainless steel. The internal valve incorporates the Venturi system and air carrier close to the silicone mouthpiece. An oversized exit valve enables higher performance of the regulator while exhaling.

First stage of chromeplated brass with a stainless steel piston that is compensated and balanced. This allows the user to maintain the same pressure through the entire use of the tank, and it also compensates for depth as well, regulating the pressure from 200 to 9 atmospheres as needed.  It has 4 3/8” low pressure exit valves and two 7/16” high pressare exits. It has a capacity of 1200 L/m with a yoke connection cod.12301 or a DIN connection, code 12302.

Second stage master with a low pressure 750mm hose. The demand valve's body is constructed of shockproof polycarbonate and internally is made of brass and stainless steel. The internal valve incorporates the Venturi system and air carrier close to the silicone mouthpiece. An oversized exit valve enables higher performance of the regulator while exhaling.

First stage of a regulatable brass with a stainless steel piston that is compensated and balanced. This allows the user to maintain the same pressure through the entire use of the tank, and it also compensates for depth as well, regulating the pressure from 200 to 9 atmospheres as needed.  It has 4 3/8” low pressure exit valves and two 7/16” high pressare exits. It has a capacity of 2000 L/m with a yoke connection cod.12281 or a DIN connection, cod.12289 or with an oxygen connection,  cod. 12282. It is treated for the use of pure oxygen as well.

Second stage master with a low pressure 750mm hose. The demand valve's body is constructed of shockproof polycarbonate and internally is made of brass and stainless steel. The internal valve incorporates the Venturi system and air carrier close to the silicone mouthpiece. An oversized exit valve enables higher performance of the regulator while exhaling.

Second stage master with a 900mm hose. The demand valve's body is constructed of shockproof polycarbonate and internally is made of brass and stainless steel. The internal valve incorporates the Venturi system and air carrier close to the silicone mouthpiece. An oversized exit valve enables higher regulator performance while exhaling.